Online total cadmium analyzer

Online total cadmium analyzer

0.00
0.00
  



Technical Features:

Touch screen for display and command input;
Multiple sampling and measuring modes;
Unique design;
Lower failure rate, less maintenance, lower reagent consumption and higher cost performance.






Technical data:

◆   Method of measurement according to: TPPS4  spectrophotometric method;

◆   Measuring range: 0 mg/L-5 mg/L; 

◆   Accuracy: ≤±10%;

◆   Reproducibility: ≤±5%;

◆   Measuring cycle: Min. 35 min;

◆   Sampling cycle: Periodic (with the interval adjustable between 10 min and 9999 min) and hourly measuring modes;

◆   Calibration cycle: Adjustable within the range of 1 to 99 days;

◆   Maintenance cycle: Once every month and approx. 30 min each time in general;

◆   Reagent consumption:
◆   Output: One-channel RS-232, one-channel RS485 &2-channel (4 ma-20 ma); GPRS communication.

◆   Environmental requirements: A temperature-controlled room; recommended temperature: +5 °C-28 °C; humidity: ≤90% RH (non-condensing);

◆   Power supply: AC220 V±10%, 50 Hz±10%, 5 A;

◆   Size: 1500 mm high x500 mm wide x450 mm deep;

◆   Others: Fault alarm, no loss of data in the case of power failure, and touch screen for display and command input; in the case of fault reset or power ON after power failure, the analyzer automatically discharges residual reagent inside and restores the working condition;








Measuring principle:

With the water sample and regulator mixed, the cadmium in the sample reacts with the indicator and produces a colored complex in the presence of alkaline environment and an indicator (TPPS4); the analyzer detects this color change and converts it into and outputs the total cadmium. The colored complex produced amounts to the quantity of total cadmium.